Your shopping cart is empty!
Search Criteria
This is the rubber boot that covers the upper and lower Ball Joint on the upright Supplied:each...
£3.95 Ex Tax: (£4.74)
Hammerhead GTS buggy 150cc handbrake / Parking cable.Supplied:each...
£29.95 Ex Tax: (£35.94)
GTS 150cc track rod end, also fits most 150cc & 250cc buggies size M10.Supplied:each...
£17.95 Ex Tax: (£21.54)
Hammerhead 150cc buggy uprated automatic choke unit, fits all GY6 150cc buggies Supplied:each..
£24.95 Ex Tax: (£29.94)
Hammerhead 150cc buggy complete piston kit including barrel. Fits the Hammerhead GT, GTS and Platinu..
£149.95 Ex Tax: (£179.94)
Hammerhead 150cc & 250cc, Front upright old style with single point mudguard fixing.Supplie..
£84.95 Ex Tax: (£101.94)
Hammerhead 150cc GTS buggy, front LEFT upright (sitting in buggy). This is the new style 2017 onward..
£79.95 Ex Tax: (£95.94)
Hammerhead 150cc GTS buggy, front RIGHT upright (sitting in buggy). The later upright has two boltin..
Hammerhead Key switch, barrel, fits hammerhead GTS and Platinum buggy.Supplied:each...
£39.95 Ex Tax: (£47.94)
Hammerhead GTS 150cc main side roll over bar. It is advised to replace the side bars and any other b..
£54.95 Ex Tax: (£65.94)
Hammerhead GTS 150cc top roof bar section.supplied:each...
£64.95 Ex Tax: (£77.94)
Hammerhead 150cc GTS off road buggy Air (See Air Filter on options). fits the Hammerhead GTS an..
Standard chain to the GY6 150cc engined buggy.supplied:Chain with link joint...
Hammerhead 150cc GTS CAM Chain Guide fits into the engine head.Supplied:each...
£15.00 Ex Tax: (£18.00)
Hammerhead 150cc GTS CAM Chain Tensioner fits into the lower part of the engine.Supplied:each...
£20.00 Ex Tax: (£24.00)
150cc off road buggy uprated variator weights for the GY6 engine. These are located i..
Hammerhead GTS 150cc buggy cylinder head gasket.Supplied:each..
£14.95 Ex Tax: (£17.94)
Uprated GY6 Hammerhead 150cc buggy cylinder head.Supplied:each...
£69.95 Ex Tax: (£83.94)
Hammerhead 150cc forward & reverse cables for later model with 2 cables, and the built in g..
£22.95 Ex Tax: (£27.54)
Front lower plastic bonnet section for the Hammerhead GTS 150cc buggy.supplied:each...
£75.00 Ex Tax: (£90.00)
Hammerhead 150cc Front standard shock absorber 325mm M10 fixing bush to fixing bush.Supplied:each...
Hammerhead GTS 150cc front wheel hub carrier.Supplied:each...
£49.96 Ex Tax: (£59.95)
Hammerhead GTS 150cc lower suspension arm. This arm will not fit the PLATINUM buggy as it has a..
£49.99 Ex Tax: (£59.99)
Hammerhead GTS 150cc rear brake caliper with brake pads included. Supplied:each..
£32.95 Ex Tax: (£39.54)
Hammerhead 150cc rear standard shock absorber 345mm M10 fixing bush to fixing bush.Supplied:eac..
£59.99 Ex Tax: (£71.99)
Uprated Hammerhead 150cc Starter motor, fits the Hammerhead 150cc buggy.Supplied:each..
£49.95 Ex Tax: (£59.94)
Uprated Hammerhead 150cc Starter solenoid / relay, will also fit Hammerhead 250cc buggy. Su..
Hammerhead 150cc steering column bushes.Supplied:2 Bushes...
Hammerhead 150cc upper and lower suspension strut bushes covers the ball joint.Supplied:pack of 4..
This is a uprated clutch which will fit all Hammerhead GTS 150cc buggies. Clutch comes complete..
£62.95 Ex Tax: (£75.54)
This is the uprated Variator clutch for the Hammerhead GTS 150cc buggy complete with weights.  ..
Hammerhead GTS and Platunim 150cc rear axelSupplied:each...
£125.00 Ex Tax: (£150.00)
Front plastic bonnet for the Hammerhead GTS 150cc buggy Black (will also fit the Platinum buggy..
Hammerhead GTS 150cc 12v uprated sealed Battery from the standard battery supplied.Supplied:each..
£39.99 Ex Tax: (£47.99)
Brake cylinder unit for the Hammerhead GTS 150cc buggySupplied:each..
This is the later Hammerhead GTS up dated front LEFT mudguard bracket with two fixing holes.supplied..
£19.95 Ex Tax: (£23.94)
Front Plastic mudguard for the Hammerhead GTS 150cc buggy, also fits the old Hammerhead GT, GTS and ..
£8.29 Ex Tax: (£9.95)
This is the later Hammerhead GTS up dated front RIGHT mudguard bracket with two fixing holes.supplie..
150cc buggy magneto statorsupplied:each...
£59.95 Ex Tax: (£71.94)
NEW uprated Hammerhead GTS 150cc buggy petrol tank only. Supplied:each..
Hammerhead 150cc rear wheel hub carrier, see options below for standard old style or new Hammerhead ..
Hammerhead GTS Spark plugSupplied:each...
£8.95 Ex Tax: (£10.74)
Hammerhead GTS 150cc drive belt. When changing the drive belt use a BUZ gun to remove the 16mm nut a..
Hammerhead 150cc buggy uprated Carburetor, fits all hammerhead 150cc buggies. The carburetor ha..
This is an uprated drive belt for the Hammerhead 150cc buggy. When changing the drive belt use a BUZ..
Variator Fin only for Hammerhead GTS 150cc buggy.Supplied:each...
Hammerhead GTS front wheel 8" diameter.Supplied:each...
Hammerhead GTS 150cc bucket seat, new style in tow parts, the back is detachable from the base.Suppl..
This is a standard Round Air filter which fits the Hammerhead GTS 150cc off road buggy Air filt..
£20.45 Ex Tax: (£24.54)
Hammerhead GTS 150cc coil plug end screws onto the coil lead.Supplied:each..
£6.95 Ex Tax: (£8.34)