Your shopping cart is empty!
Search Criteria
This is the rubber boot that covers the upper and lower Ball Joint on the upright Supplied:each...
£3.95 Ex Tax: (£4.74)
Hammerhead GTS buggy 150cc handbrake / Parking cable.Supplied:each...
£29.95 Ex Tax: (£35.94)
Hammerhead & GY6 150cc throttle cable also fits the Hammerhead 250cc buggy, it is just over 2140..
Hammerhead 150cc buggy uprated automatic choke unit, fits all GY6 150cc buggies Supplied:each..
£24.95 Ex Tax: (£29.94)
Hammerhead 150cc buggy complete piston kit including barrel. Fits the Hammerhead GT, GTS and Platinu..
£149.95 Ex Tax: (£179.94)
Hammerhead 150cc & 250cc, Front upright old style with single point mudguard fixing.Supplie..
£84.95 Ex Tax: (£101.94)
Hammerhead 150cc GTS buggy, front LEFT upright (sitting in buggy). This is the new style 2017 onward..
£89.95 Ex Tax: (£107.94)
Hammerhead 150cc GTS buggy, front RIGHT upright (sitting in buggy). The later upright has two boltin..
Hammerhead Key switch, barrel, fits hammerhead GTS and Platinum buggy.Supplied:each...
£39.95 Ex Tax: (£47.94)
Hammerhead GTS 150cc main side roll over bar. It is advised to replace the side bars and any other b..
£54.95 Ex Tax: (£65.94)
Hammerhead GTS 150cc top roof bar section.supplied:each...
£64.95 Ex Tax: (£77.94)
Hammerhead GTS 150cc buggy axle cog bolt set.Supplied: Pack of 4 Bolts & Nylock Nuts..
£6.00 Ex Tax: (£7.20)
Hammerhead 150cc GTS off road buggy Air (See Air Filter on options). fits the Hammerhead GTS an..
Hammerhead 150cc GTS CAM Chain Guide fits into the engine head.Supplied:each...
£15.00 Ex Tax: (£18.00)
Hammerhead 150cc GTS CAM Chain Tensioner fits into the lower part of the engine.Supplied:each...
£20.00 Ex Tax: (£24.00)
Hammerhead GTS buggy uprated variator weights. These are located in the variator that..
Uprated GY6 Hammerhead 150cc buggy cylinder head, complete with valves.Supplied:each...
£69.95 Ex Tax: (£83.94)
Hammerhead 150cc forward & reverse cables for later model with 2 cables, and the built in g..
£24.99 Ex Tax: (£29.99)
Front lower plastic bonnet section for the Hammerhead GTS 150cc buggy.supplied:each...
£75.00 Ex Tax: (£90.00)
Hammerhead 150cc Front standard shock absorber 325mm M10 fixing bush to fixing bush.Supplied:each...
Hammerhead GTS 150cc front wheel hub carrier.Supplied:each...
£39.96 Ex Tax: (£47.95)
Hammerhead GTS 150cc lower suspension arm. This arm will not fit the PLATINUM buggy as it has a..
£49.99 Ex Tax: (£59.99)
Hammerhead GTS 150cc rear brake caliper with brake pads included. Supplied:each..
£32.95 Ex Tax: (£39.54)
Hammerhead 150cc rear standard shock absorber 345mm M10 fixing bush to fixing bush.Supplied:eac..
£59.99 Ex Tax: (£71.99)
Uprated Hammerhead 150cc Starter motor, fits the Hammerhead 150cc buggy.Supplied:each..
£49.95 Ex Tax: (£59.94)
Uprated Hammerhead 150cc Starter solenoid / relay, will also fit Hammerhead 250cc buggy. Su..
Hammerhead 150cc steering column bushes.Supplied:2 Bushes...
Hammerhead 150cc upper and lower suspension strut bushes covers the ball joint.Supplied:pack of 4..
£14.95 Ex Tax: (£17.94)
This is the uprated Variator clutch for the Hammerhead GTS 150cc buggy complete with weights.  ..
Hammerhead GTS and Platunim 150cc rear axelSupplied:each...
£125.00 Ex Tax: (£150.00)
Front plastic bonnet for the Hammerhead GTS 150cc buggy Black (will also fit the Platinum buggy..
£79.95 Ex Tax: (£95.94)
Hammerhead GTS 150cc 12v uprated sealed Battery from the standard battery supplied.Supplied:each..
£39.99 Ex Tax: (£47.99)
This is the later Hammerhead GTS up dated front LEFT mudguard bracket with two fixing holes.supplied..
£19.95 Ex Tax: (£23.94)
Front Plastic mudguard for the Hammerhead GTS 150cc buggy, also fits the old Hammerhead GT, GTS and ..
£8.29 Ex Tax: (£9.95)
This is the later Hammerhead GTS up dated front RIGHT mudguard bracket with two fixing holes.supplie..
150cc buggy magneto statorsupplied:each...
£59.95 Ex Tax: (£71.94)
NEW uprated Hammerhead GTS 150cc buggy petrol tank with top breather hose. Supplied:each..
Hammerhead 150cc rear wheel hub carrier, see options below for standard old style or new Hammerhead ..
Hammerhead GTS Spark plugSupplied:each...
£9.95 Ex Tax: (£11.94)
Hammerhead GTS 150cc drive belt. When changing the drive belt use a BUZ gun to remove the 16mm nut a..
Hammerhead 150cc buggy uprated Carburetor, fits all hammerhead 150cc buggies. The carburetor ha..
This is a uprated clutch which will fit all Hammerhead GTS 150cc buggies. Clutch comes complete..
This is an uprated drive belt for the Hammerhead 150cc buggy. When changing the drive belt use a BUZ..
Variator Fin only for Hammerhead GTS 150cc buggy.Supplied:each...
Hammerhead GTS front wheel 8" diameter.Supplied:each...
Hammerhead GTS 150cc bucket seat, new style in tow parts, the back is detachable from the base.Suppl..
This is a standard Round Air filter which fits the Hammerhead GTS 150cc off road buggy Air filt..
Hammerhead GTS Tow ball with addition drop pin option allows the buggy to tow a small light weight t..
£120.00 Ex Tax: (£144.00)
Hammerhead GTS 150cc exhaust gasket (compression ring)Supplied:each...
£9.86 Ex Tax: (£11.83)
This is the Final drive cog from the Hammerhead GTS 150cc which is bolted to the rear axle..