Your shopping cart is empty!
In Stock (BW1)
Tags: BEAST Buggy
The BEAST 150R is a Factory built road legal buggy ready to drive away with a brand new 2 Litre FORD Zetec engine pushing out 150 bhp and only weighing in at about 450 kgs
0 reviews / Write a review
The Beast is great for On and Off road use, or even putting you skill to one of the famous track day circuits around the country. Blitzworld have access to over 3500 acres of land to play on, so if you fancy climbing virtually impossible hills or getting covered in mud we have it all.
The buggy is fitted with a Brand NEW FORD 2 litre 16v Zetec engine with the latest plug and play engine management system allowing you to custom tune and diagnose the engine from your own lap top with software included.
The buggy has long travel rear trailing arm suspension to soak up the demanding terrain. The suspension is custom made for the buggy with rebound damping and coil over springs with nitrogen damped coil overs on the rear, offering the best handling for on and off road use.
The buggy is designed and built by Blitzworld Buggies in the UK, with allot of attention to detail in the strength and durability of the vehicle for both on and off road use. The chassis design is of NASCAR principles with a full roll cage.
We feel that our buggy is one of the toughest buggies on the market and we back it up with a 2 year parts & labour warranty.
For a complete breakdown of the buggy and parts included, click on the PARTS tab above for details of all the assemblies included in the BEAST package.
The Chassis kit is supplied as a complete frame painted in your colour with the Blitzworld engine ba..
£2,495.00 ex VAT
The Vigilante trailing arm unit comes complete with bearings, rod ends and wheel hub fitted. Th..
£795.00 ex VAT
The front runnging gear kit includes; the front lower arms, front hubs, bearings, brake disc, whee..
This is the budget GAZ suspension kit with rebound damping for the rear arms. The rebound damping pl..
£1,595.00 ex VAT
The Vigilante ATV wheel package also includes Blitzworlds own high grade Zinc pasifated wheel spacer..
£995.00 ex VAT
The Blitzworld brake kit includes the brake lines and the calipers and pads. The brake lines are sta..
Blitzworld are now offering a BRAND NEW 2 Litre FORD Zetec-E engine package for the Vigilante buggy...
£2,995.00 ex VAT
Blitzworld offer 3 standard engine installation options for the Vigilante Sport Chassis, which are:
£695.00 ex VAT
The Vigilante drive shafts for engines under 140 bhp are joined. We use the existing gear box dr..
£425.00 ex VAT
This a Factory built, custom made Stainless steel exhaust with a catalytic converter ..
For the Vigilante cumfort we have our own seat made by Corbrau which is a vinile bucket race seat th..
£1,150.00 ex VAT
The Blitzworld Vigilante gear lever assembly, also comes complete with Blitzworlds own designed..
£465.00 ex VAT
Vigilante handbrake lever assembly is very strong and robust to take the forces applied due to the n..
£195.00 ex VAT
Blitzworld have now designed and made our own pedal box which will accommodate cable or hydraul..
£550.00 ex VAT
The Vigilante FORD Radiator is includes the elbows, hoses and temperature sensor.
1 off ..
£595.00 ex VAT
The Vigilante Fuel Kit is suitable for all engines from 900cc to 2000cc +. The kit includes the fuel..
£850.00 ex VAT
The ME engine management system we find is better than Omex or DTA as it has more outputs allowing f..
£1,095.00 ex VAT
This is Blitzworld's own custom made fully adaptable wiring loom that can be eaisly adapted to any e..
The Vigilante lights kit is suited to the Vigilante buggy and the full bodywork kit. The rear lights..
£495.00 ex VAT
The Vigilante Muds and Bonnet kit is road legal and is suited for OFF and ON road driving. The mudgu..
When fitting an aftermarket ECU like ME, Omex or DTA they have to be mapped and tuned so that the bu..
The VOSA IVA test is required to make your buggy road legal, so it can be issued with a UK numberpla..
£750.00 ex VAT
These socks go over the suspension strut springs keeping them clean from mud and dirt getting onto t..
£39.95 ex VAT
This is a good looking tyre suited for the Vigilante buggy it is a good off roader and road tyre, as..
This is a great rally spec OMP 330mm diameter steering wheel for the Renegade DX10 buggy. The wheel ..
£125.00 ex VAT
This is a LED Headlight with the indicator light built in and IVA approved, supplied as a set of two..
The quick release steering wheel hub offers a safety feature and ease of access to the buggy. The hu..
£85.00 ex VAT
This is a great rally spec steering wheel to add to your buggy with the omp logo. The wheel is suppl..
£145.00 ex VAT
The part of any vehicle is the suspension, so we have custom designed the suspension to fit the Vigi..
The Z1000 buggy comes with a standard cross body car seatbelt which we do not feel suits the vehicle..
£395.00 ex VAT
This is a very good uprated Safety harness made by OMP and has 3" shoulder straps and 2" lap straps...
£110.00 ex VAT
Vigilante buggy collapsible steering boss.Supplied:each..
£49.95 ex VAT
These are very good omp pedal plates that stop you feet sliding off the pedals when wet or muddy. Th..
£37.95 ex VAT
The WARN 3629 Kgs (8000 lb or 3.6 ton) winch is suitable for the vigilante buggy and locates on the ..
£1,495.00 ex VAT
Vigilante Roof panel. This panel is supplied ready to trim and fit to the buggy. The panel is locate..
£249.95 ex VAT
NEW 17" Wolfrace alloy wheel, bolts directly onto the Vigilante wheel adaptor.This is a light weight..
The roll bar padding is compulsory on all Blitzworld rallies. This padding fits perfectly over the c..
£19.95 ex VAT
This is a alumium engine bay cover for the Vigilante Buggy, this bolts on over the engine protecting..
BEAST all in one number plate holder with built in lights
Get in touch with us today for more information on our products and services